Send a CareLink

Therapy data

 Your AirSense 10 device records your therapy data for you and your care provider so they can view and make changes to your therapy if required. The data is recorded and then transferred to your care provider wirelessly (cell phone system). Your unit has its own internal cell system. It does not need your phone or your internet connection. If a wireless network is not available, data can be transfered by SD card.

Wireless

Your AirSense 10 device is equipped with cellular communication. This allows your therapy data to be wirelessly transmitted to your care provider to enhance the quality of your treatment. It also allows therapy settings to be updated in a more timely manner or your device software to be upgraded. The Wireless signal strength icon  displayed at the top right of your screen indicates

the signal strength. The data is usually transmitted after therapy has stopped. In order to make sure that your data is transferred, leave your device connected to the power outlet at all times and make sure that it is not in Airplane Mode.

 Wireless Notes:

 • Therapy data might not be transmitted if you use it outside of the country or region of purchase.

 • Devices with cellular communication might not be available in all regions. Please be aware that within the wireless network, the availability and quality of the network may be affected by terrain, buildings and the weather. Wireless communication depends on network availability. Coverage is not available everywhere and varies by service.

SD card:

 An alternative way for your therapy data to be transferred to your care provider is via the SD card, if provided. Your care provider may ask you to send the SD card by mail or to bring it in. When instructed by your care provider, remove the SD card. Do not remove the SD card from the device when the SD light is flashing, because data is being written to the card.

To remove the SD card:

 1. Open the SD card cover.

2. Push in the SD card to release it. Remove the SD card from the device. Place the SD card in the protective folder and send it back to your care provider.

 Note: The SD card should not be used for any other purpose. 

 Was this topic helpful? Click here to report an error or comment on the topic.